Labor saving wrench operating instructions: respectively sleeve the rotating hexagon socket of the socket wrench part and the locating ring socket of the bracket part to the parts to be disassembled.
The screw and its adjacent screws shall be rotated around the screw by applying hand force on the lever on the force-increasing screw, and the screw shall be pushed in Ball handle torsion arm The ball handle at the end of the rod produces a large torque moment for rotating the hexagon socket to turn the screws that are caught.
Remarks:
1. Pay attention to the tightening direction of tire screws. Unfamiliar friends repair the car by themselves and often make mistakes in the screw threads
Direction, when using the tire labor-saving wrench, be sure to distinguish clearly, otherwise, the screw may be broken.
2. Don't use too much force, just fit it. The speed ratio of the input and output force of the labor-saving wrench is about 58:1, and the torque changes
It is very large. If the input end is tightened too tightly, it is very likely to break or tighten the slip thread tire screw.
3. Be careful not to bump the tire labor-saving wrench. The general labor-saving wrench is composed of planetary gear and other components, so pay attention to the use
Don't bump it to prevent premature damage.
